Dude I just realized I already found your build a while back I took a bunch of your photos as screen grabs to help me with mine. Awesome build this is amazing!
Dude I just realized I already found your build a while back I took a bunch of your photos as screen grabs to help me with mine. Awesome build this is amazing!
Dude I just realized I already found your build a while back I took a bunch of your photos as screen grabs to help me with mine. Awesome build this is amazing!
Ok so weathered my Woodman cape a bit. Made some scissor cuts along the bottom edge and holes with a razor knive. Washed 3 times to allow it to fray. Hang dry so it won’t shrink. Followed another members post can’t remember who.
Here is the right gauntlet first then the left. So I epoxied and Chicago screws on the top half to hold the straps. I need to reinforce the hole in the strap because it will pull through.
You can see that I used heavy duty Velcro to hold both together. Installed the hook and loop on opposite sides. I also had to glue in some styrene strips to lengthen the areas were the Velcro attaches.
1st 4 pics are the right gauntlet. 2nd 5 are the left gauntlet
Here is the right gauntlet first then the left. So I epoxied and Chicago screws on the top half to hold the straps. I need to reinforce the hole in the strap because it will pull through.
You can see that I used heavy duty Velcro to hold both together. Installed the hook and loop on opposite sides. I also had to glue in some styrene strips to lengthen the areas were the Velcro attaches.
1st 4 pics are the right gauntlet. 2nd 5 are the left gauntlet
Got my hollow stalk installed from MachineCraftReplicas and JC27 range finder lights. And HenrysHelmetfans installed. No more foggy visor’s. Just need to get a servo for the stalk. Just Velcro and gaffers tape. Might adjust the fans when I get a servo.
I have received my Jetpack from ManofWarStudios. All mold release has been washed off. I have started the sanding and fitting process for the rocket. Progress photos to follow.
Finally prep and assembly is done ready for some primer and paint. I fitted up the Jetpack hooks. Had to trim the bottom hooks to fit the MoW pack. Leveled out the bottom with a little bondo. Installed the bottom greeblies. Installed some magnets for the back cover plate.