ShortFuse
Well-Known Hunter
At the beginning of this year I commissioned 3D Master Lazerjock to print me a resin ROTJ EE-3 kit using RafalFett models.
This is the beautiful result.
The resolution is very high and will require little to no sanding. I purchased the aluminum stock bracket from Airmarshal, since a resin one would be too fragile and would eventually and undoubtedly break. The stock bracket fits in the slot and bolt holes line up perfectly. A testament to these three guys.
Not pictured is a 4x20 scope I purchased due to the printed one being very thin-walled and fragile.
This will be taking the place of my current EE-3, that is a Hasbro conversion I did several years ago.
My first step will be to shoot everything with primer to see if there is any sanding required and then do a preliminary assembly. Are there any suggestions for hardware types/sizes? Any help or tips would be greatly appreciated since this will be my first actual EE-3 kit build. Thanks.
This is the beautiful result.
The resolution is very high and will require little to no sanding. I purchased the aluminum stock bracket from Airmarshal, since a resin one would be too fragile and would eventually and undoubtedly break. The stock bracket fits in the slot and bolt holes line up perfectly. A testament to these three guys.
Not pictured is a 4x20 scope I purchased due to the printed one being very thin-walled and fragile.
This will be taking the place of my current EE-3, that is a Hasbro conversion I did several years ago.
My first step will be to shoot everything with primer to see if there is any sanding required and then do a preliminary assembly. Are there any suggestions for hardware types/sizes? Any help or tips would be greatly appreciated since this will be my first actual EE-3 kit build. Thanks.
Last edited: