DOH! painting fail

T0R1C

New Hunter
sooooo I wasn’t thinking and painted the whole mandibles on my bucket. My helmet is not CC, I used silver leaf rub & buff for the silver parts.

Do you all suggest I use paint thinner / turpentine to remove then primer, then apply r&b in the lower mandibles or can I go straight to the primer?

Thanks for your thoughts...and prayers.

C3E04119-09CE-48B4-88D9-354A0A2A4A4A.jpeg
 
Turpentine would probably work. Also just sanding the paint off down to the primer coat would work too. Though I think the hand sanding method may require more effort and be slower than just stripping the cheek parts down with turpentine and reshooting a primer and paint.
 
This thread is more than 5 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top