ROTJ Special Edition Promo

Greg Schlueter

Active Hunter
3C2180E7-8977-4892-84F5-7A85EA552B35.jpeg Starting off first with a WastedFett FPH2 ESB Helmet Boba Fett Build with my Helmet Build almost done with the Prep. My prep progress is on the Helmet feed.
 
Last edited:
Thanks for posting that link, I was just looking into building my shin tool collection
Your welcome. I’m going to get the 3rd shin tool parts from Machine Craft Replicas. They are the stylus metal Replicas plus the piece you cut off the Paterson print squeegee. As for the 4th Rafael makes a 3D print of the pipe. Or you can get a aluminum pipe 30mm based on specs.
 
Looks great! I think you're missing the white smudge on the front right of the helmet for SE, no?
 
Ok so I got the black on the center done and the base Charcoal and white wash mix on the rest of the boots. I used Ceramcoat Acrylic paints. Ready to do the next stage in the weathering.

73C125CE-D46E-4B02-BA82-5E495370D048.jpeg


BEEA5180-F949-44FE-9DC3-BED30C9CC9E0.jpeg
 
This thread is more than 4 years old.

Your message may be considered spam for the following reasons:

  1. This thread hasn't been active in some time. A new post in this thread might not contribute constructively to this discussion after so long.
If you wish to reply despite these issues, check the box below before replying.
Be aware that malicious compliance may result in more severe penalties.
Back
Top